Stamped concrete services in Pomona CA - a pattern that sits on solid ground
Tired of a plain or cracked gray slab? We dig out and pack the base, then stamp a pattern you can keep looking good.
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
What does stamped concrete involve, and what drives the price?
Stamped concrete is a regular slab that we press with a pattern while it's still wet, so your patio, walk or pool area looks like stone, brick or wood. We do stamped concrete services across Pomona, CA, and the part that decides how it looks in a few years is the ground underneath, not the pattern on top.
Most people who call about stamping have a plain patio they're tired of or an old slab that's cracked and sunk. The price mostly moves with three things: how big the area is, how fancy the design gets and what contractors around here are charging. The schedule turns on the weather and on whether the work touches the public sidewalk, since that part needs a city permit first. If you're starting from bare dirt, it's the same groundwork as our concrete patio construction, with the stamping added on top. The written estimate I leave you turns your size and your pattern into a real number.
How do you know your patio or walk is ready for stamped concrete?
Cracks and sunken corners
When your old slab has cracks running through it or corners that dropped, the ground under it usually settled or washed out. Stamping over it won't fix that, and the longer you wait the more it tilts, so we usually break it out and start over on a packed base.
Faded, chalky color
A stamped patio that's gone pale and dull has usually lost its sealer to sun and foot traffic. Left bare, the surface stains and wears faster, and a wash and reseal now costs a lot less than a tear-out later.
Water pooling near the house
If water sits on the patio or runs toward your walls after the sprinklers shut off, the slab was set with the wrong fall. It doesn't fix itself, and that water ends up under the slab or against the foundation.
Our stamped concrete services, start to finish
We start under the slab, because that's where stamped jobs fail. We check where your water runs so the slab falls away from the house, then dig out and pack the subgrade, the ground the concrete sits on, instead of raking it level and hoping. We set forms, lay rebar, the steel that holds the slab together, pour early in the day, then float and trowel the surface smooth. Next comes the color, a powder release or plastic sheet so the stamps don't stick, and the stamps themselves, pressed in and lifted off to leave the pattern. We cut control joints, shallow cuts that give the slab a place to crack where you won't notice, and let it cure, the wait while it hardens, before we wash and seal it. If the budget gets tight, I'll drop a border before I skimp on the base, because nobody sees the base on day one and everybody sees it when the slab sinks. Simple patterns hold up and are easier to keep looking good, while fancy borders and extra colors need more care, and I tell you that before you pick.
Stamping often comes with plainer work around it. We pour concrete sidewalks that lead to a stamped patio or match its border, and garage floor concrete with a broom finish, a light brushed texture for grip, when you want the outside dressed up and the garage plain and tough.
One pattern, one color
This suits most patios and walks, because it costs less and is easier to keep looking good. It's quieter to look at, and a lot of people end up liking that.
Borders, extra colors and inlays
This suits a front entry or a pool area you want to show off. It costs more and needs frequent upkeep to keep its look, so go in knowing that.
Antique release finish
This suits someone who wants an aged, two-tone look. One maker's antique release is pressed in during stamping, and once it's washed off and sealed it leaves a second color effect.
Get a written price for your stamped slab
We reply within one business day. I come out, look at the ground, measure and write up a free estimate on site, with no pressure to book. You get the price in writing for the design you're leaning toward.
(909) 729-4086What changes a stamped concrete job in Pomona
If any part of your job reaches the public right-of-way, like the sidewalk out front or the strip along the curb, the City of Pomona's Engineering Services requires a permit for that work, and we pull it and handle the paperwork. The state sets the other rule worth knowing before you hire anyone. California's contractor license board only lets someone work without a license on jobs under $1,000 that need no permit, and only when they have no employees on the project. Most stamped jobs cost more than that, so the person you hire should hold a state license.
Summer afternoons here can dry the top of a slab before it stamps cleanly, which leaves a weak, dusty surface later, so we start pours early in the day. We see the same heat and the same tired, settled patios on jobs in Ontario and La Verne, and we plan those pours the same way.
What happens after you call about stamped concrete in Pomona?
Call or send us a message
Call (909) 729-4086 or use the form, and tell us roughly how big the area is and what's there now. We set a time for me to come out.
I measure and check the ground
I look at what the slab will sit on, measure and ask how you'll use the space. You get a written estimate for the pattern and colors you picked, so you can compare it line for line with anyone else's.
My crew forms, pours and stamps
If you go ahead, we take care of any permit the job needs, then my crew forms, pours, stamps and cuts the joints while I check the work. The slab cures before we wash and seal it.
We walk the finished job
Once it's sealed, we walk the whole thing with you before we pack up. That's the time to ask questions and point at anything you want explained.
Frequently asked questions
How much does stamped concrete cost in Pomona, CA?
Stamped concrete in the Los Angeles area usually costs about $15 to $30 per square foot, and that's the market's range for the finished stamped slab, not our price. Where your job lands depends on its size, how complex the design is and local contractor rates. The written estimate gives you the number for your own space.
How often does stamped concrete need to be resealed in Southern California?
A Los Angeles area guide puts resealing at every two to three years, because upkeep here mostly comes down to sun and foot traffic. A patio in full afternoon sun usually wants it on the sooner end.
Will stamped concrete color look the same across the whole slab?
No, and I tell everyone that before we pour. One maker notes that site conditions, the mix, curing, finishing and sealer can all shift the color of the finished slab, so plan on some variation from one end to the other.
Does sealer make stamped concrete slippery?
It can. One sealer maker says traction may drop with each coat, and an anti-skid grit such as sand, added while the sealer is still wet, can offset that. If you want firmer footing around a pool or on a sloped walk, ask us for that step every time it's sealed.
How long does stamped concrete need to cure before it's sealed?
One maker's guide says 72 hours or more before the surface is washed and sealed. We wait it out instead of sealing the same day, because concrete is still hardening during that stretch.
What is the best way to keep stamped concrete from cracking?
Start with the ground under it, because a pattern can't hide a slab that settles. One maker says the ground must be evenly graded, compacted, free of standing water and dry when the concrete goes in, and the control joints we cut give any cracks a place to go. Nobody can promise concrete won't crack, but those two things decide whether you ever notice.
Pomona, CA
Send us your size and pattern
With the rough size, the design you like and whether the work reaches the sidewalk or street, I can come out ready to price the job.